Load Control (Checks)
Inline Pilot Check
Pilot-to-open check cartridges are non-modulating, on-off devices that allow free flow through a check valve from port 2 (VLV) to port 1 (CYL) and then block reverse flow until a pilot pressure is sensed at port 3 (PILOT) so that a pilot piston can push the check off its seat. These Inline versions are available with a range of port configurations and flow capacity from low to 800LPM.
Inline Pilot Check (4 Port)
Pilot-to-open check cartridges are non-modulating, on-off devices that allow free flow through a check valve from port 2 (VLV) to port 1 (CYL) and then block reverse flow until a pilot pressure is sensed at port 3 (PILOT) so that a pilot piston can push the check off its seat. These Inline versions have 4 ports so are internally Piloted. Capacities from low to 120LPM.
Pad Mounted Pilot Check
Pilot-to-open check cartridges are non-modulating, on-off devices. These Pad mounted versions are available to suit 1/2" SAE Pads thru to 1" SAE Pads. Flow capacity from low to 200LPM.
Pad Mounted Module Pilot Check
Pilot-to-open check cartridges are non-modulating, on-off devices. These Pad mounted modules are designed to sandwich between a SAE port and the SAE Flange. Available in both Code 61 & 62 and sizes from 1/2" to 1&1/2". Flow capacity from low to 400LPM.
Double Inline Pilot Check
Pilot-to-open check cartridges are non-modulating, on-off devices. These Double Inline Valves will lock an actuation from moving in both directions. The Cartridges are internally piloted in the manifold. Available in large range of port configurations and flow capacity from low to 400LPM.
